GP3
GP3 Smart Badge · RUICTEC Positioning Product Series
Overview
GP3 is an all-in-one smart positioning badge. A single device delivers "outdoor satellite positioning + indoor BLE beacon positioning + long-range LoRa data backhaul", with integrated PDR pedestrian dead reckoning, voice broadcast, posture/step detection, floor determination and power management. It is suitable for personnel positioning, trajectory management and safety early warning.
Multi-mode fusion positioning: outdoor GNSS satellite positioning, indoor near-field positioning via BLE beacon scanning, data backhauled over long-range LoRa — seamlessly across indoor and outdoor.
PDR pedestrian dead reckoning (no blind spots): in areas without GNSS / BLE coverage (basements, tunnels, deep inside buildings), inertial sensors + magnetometer keep estimating position, eliminating positioning blind spots.
Long-range backhaul: built-in long-range LoRa communication, suitable for data reporting in large-area, weakly-networked environments.
Voice prompt: supports local voice broadcast for attendance reminders, safety alarms, person-finding calls, etc.
Motion sensing: tri-axis accelerometer + magnetometer + barometer, supporting step counting, motion/rest detection, electronic compass and floor/altitude determination.
Low-power endurance: GPS can be independently powered off, combined with low-power MCU and power management, adapting to long-time badge wearing.
Specifications
| Model | GP3 |
|---|---|
| Overall Dimensions | 99 mm × 62 mm × 9 mm (L × W × H) |
| Main MCU | Low-power BLE SoC (BLE 5.0, Cortex-M4F) |
| Long-range Comms | LoRa long-range communication (max TX power +22dBm); 4G Cat1 cellular backhaul (LoRa / 4G optional) |
| Supported Bands | US915 / EU868 / AS923 / AU915 |
| Satellite Positioning | Multi-GNSS module (outdoor GPS/BeiDou L1/L5 dual-band, independently switchable power) |
| Voice Broadcast | On-board voice chip + speaker (alarm/reminder audio) |
| PDR Core | 6-axis sensor hub (with accelerometer) |
| Heading Sensor | 3-axis magnetometer (provides heading) |
| Motion Sensor | 3-axis accelerometer |
| Environment Sensor | Barometric sensor (floor/altitude) |
| Power Gauge | Fuel-gauge IC (real-time battery monitoring) |
| Power Management | Linear charge-management IC + dual 3.3V LDO + GPS-dedicated DCDC |
| Battery | Single Li-Po battery (with NTC temperature protection), 1500 mAh capacity |
| Charging Interface | Pogo Pin connector, USB 5V input, typical charge current ~600mA |
| Wireless | BLE 5.0 / LoRa / GNSS satellite positioning |
| Positioning Mode | GNSS + BLE beacon + PDR dead reckoning (multi-mode fusion) |
| Positioning Accuracy / Range | Depends on deployment and firmware, subject to field test |
| Status Indicator | Multi-color LED (running / charging) |
| Physical Button | Reserved function button (SOS / stop) |
| Interfaces | Shared charge & programming port, battery connector, GPS antenna socket, speaker output |
| Antenna | BLE 2.4GHz onboard ceramic antenna / LoRa internal spring antenna / GNSS external active antenna |
⚙️ Decoder Script ⚙️ Encoder Script
The decoder / encoder scripts must be configured in the LoRaWAN network server (e.g. ChirpStack v4) to parse uplink data and encode downlink commands.
Key Features
GP3 supports outdoor GNSS positioning and indoor BLE beacon positioning; position is backhauled to the platform via LoRa. In GNSS / BLE blind spots, the accelerometer detects step frequency and stride while the magnetometer provides heading, continuously estimating personnel position to deliver uninterrupted trajectories "even without signal".
Trajectory Playback: records movement paths, supports historical trajectory query.
Zone / Dwell Management: zone entry/exit and dwell-time statistics.
Motion & Routine: active/rest-time statistics, step counting.
Voice Broadcast: voice prompts for attendance, alarm and person-finding scenarios.
Floor / Altitude: barometer-assisted indoor floor determination.
Power & Charging: real-time battery display, USB charging, built-in temperature protection.
In Development · End 2026Product Appearance


Front (left) and back (right): integrated top clip for lanyard/clip wearing, large round SOS button on the back, side SIM card slot, front speaker grille.
-
Scan to Chat on WhatsApp
-
Scan WeChat QR
-
Buy
SamplesBuy evaluation samplesOrder ready-to-ship samples from our Tindie store — validate quality before volume orders.
Go to Tindie store →